English
Voltage: | 20V |
No-load speed: | 0-2200r/min |
Max. Torque: | 100Nm |
Min. Torque: | 330Nm |
Battery(Li-ion): | 6000mAh |
Attachment functions: | Reversal stop |
| Customized support: | OEM |
1. High torque output: 350N·m of torque is enough to meet the needs of tightening or disassembling high-strength bolts in scenarios such as automobile maintenance and mechanical assembly.
Brushless motor technology: Compared with traditional brushed motors, brushless motors have higher energy conversion efficiency (about 80%-90%), stronger power, and can continuously output stable torque to avoid power drops due to excessive load.
2. Lithium battery advantages: With high-performance 6000mAh lithium-ion batteries, the battery life is significantly better than nickel-hydrogen batteries, and it supports fast charging to reduce operation interruptions.
Low energy consumption design: Brushless motors generate less heat and have low losses during operation, further extending the use time of a single charge.
3: The brushless design eliminates the failure of traditional motors caused by carbon brush wear, and the life span can reach more than 3 times that of brushed motors.
Impact-resistant structure: Most brushless lithium-ion wrenches use metal gearboxes and engineering plastic shells, which are suitable for harsh working conditions (such as vibration and dusty environments)
4. Compact design: The brushless motor is smaller in size, the overall weight of the tool is lighter, and it is not easy to get tired after long-term use.
Ergonomic grip: The non-slip handle and low-vibration design improve the operating comfort and are suitable for working in small spaces.
5. Intelligent control function
-Multi-speed regulation: The speed and torque can be adjusted according to the task requirements (such as precise control of low-speed gears and fast disassembly and assembly of high-speed gears).
Electronic protection system: Built-in overload protection, temperature protection, and battery overcharge/over-discharge protection to improve safety.
LED lighting: Some models are equipped with work lights for use in dim environments.
6. Low maintenance cost
No need to replace carbon brushes: Brushless motors eliminate the maintenance steps of regular replacement of carbon brushes, and the long-term use cost is lower.
Modular design: Batteries, motors and other components can be quickly replaced, and maintenance is convenient. Applicable scenarios: Automobile maintenance: tire disassembly and assembly, engine bolt tightening.
Industrial assembly: steel structure, mechanical equipment bolt operation.
Home DIY: furniture assembly, garden equipment maintenance, etc.
350N Brushless Impact Wrench Advantages:
1. Lightweight and portable design;
2. High-speed brushless motor for powerful impact and ample power;
3. Easy conversion between wrench and screwdriver modes for handling various scenarios;
4. Automatic stop system to prevent screws from coming loose and causing injury;
5. Ternary lithium battery providing strong, long-lasting endurance;
6. Intelligent CNC panel with torque adjustment, reverse stop, and function switching keys;
7. Continuous speed control, allowing you to adjust the speed at will, with an emergency braking feature;
8. Tungsten steel shaft and high-aluminum casing for superior hardness, wear resistance, and corrosion resistance;
9. One-button forward and reverse rotation for easy assembly, disassembly, and tightening as needed;
10. Real-time battery display for worry-free operation;
11. Powerful cooling to prevent overheating during extended use;
12. LED lighting to illuminate your workspace and eliminate darkness;
13. Waterproof, dustproof, and shockproof body for added protection.
Voltage: | 20V |
No-load speed: | 0-2200r/min |
Max. Torque: | 100Nm |
Min. Torque: | 330Nm |
Battery(Li-ion): | 6000mAh |
Attachment functions: | Reversal stop |
| Customized support: | OEM |
1. High torque output: 350N·m of torque is enough to meet the needs of tightening or disassembling high-strength bolts in scenarios such as automobile maintenance and mechanical assembly.
Brushless motor technology: Compared with traditional brushed motors, brushless motors have higher energy conversion efficiency (about 80%-90%), stronger power, and can continuously output stable torque to avoid power drops due to excessive load.
2. Lithium battery advantages: With high-performance 6000mAh lithium-ion batteries, the battery life is significantly better than nickel-hydrogen batteries, and it supports fast charging to reduce operation interruptions.
Low energy consumption design: Brushless motors generate less heat and have low losses during operation, further extending the use time of a single charge.
3: The brushless design eliminates the failure of traditional motors caused by carbon brush wear, and the life span can reach more than 3 times that of brushed motors.
Impact-resistant structure: Most brushless lithium-ion wrenches use metal gearboxes and engineering plastic shells, which are suitable for harsh working conditions (such as vibration and dusty environments)
4. Compact design: The brushless motor is smaller in size, the overall weight of the tool is lighter, and it is not easy to get tired after long-term use.
Ergonomic grip: The non-slip handle and low-vibration design improve the operating comfort and are suitable for working in small spaces.
5. Intelligent control function
-Multi-speed regulation: The speed and torque can be adjusted according to the task requirements (such as precise control of low-speed gears and fast disassembly and assembly of high-speed gears).
Electronic protection system: Built-in overload protection, temperature protection, and battery overcharge/over-discharge protection to improve safety.
LED lighting: Some models are equipped with work lights for use in dim environments.
6. Low maintenance cost
No need to replace carbon brushes: Brushless motors eliminate the maintenance steps of regular replacement of carbon brushes, and the long-term use cost is lower.
Modular design: Batteries, motors and other components can be quickly replaced, and maintenance is convenient. Applicable scenarios: Automobile maintenance: tire disassembly and assembly, engine bolt tightening.
Industrial assembly: steel structure, mechanical equipment bolt operation.
Home DIY: furniture assembly, garden equipment maintenance, etc.
350N Brushless Impact Wrench Advantages:
1. Lightweight and portable design;
2. High-speed brushless motor for powerful impact and ample power;
3. Easy conversion between wrench and screwdriver modes for handling various scenarios;
4. Automatic stop system to prevent screws from coming loose and causing injury;
5. Ternary lithium battery providing strong, long-lasting endurance;
6. Intelligent CNC panel with torque adjustment, reverse stop, and function switching keys;
7. Continuous speed control, allowing you to adjust the speed at will, with an emergency braking feature;
8. Tungsten steel shaft and high-aluminum casing for superior hardness, wear resistance, and corrosion resistance;
9. One-button forward and reverse rotation for easy assembly, disassembly, and tightening as needed;
10. Real-time battery display for worry-free operation;
11. Powerful cooling to prevent overheating during extended use;
12. LED lighting to illuminate your workspace and eliminate darkness;
13. Waterproof, dustproof, and shockproof body for added protection.
